This instruction is based on the use of a B15 rated bulkhead,
using 19mm thick PROMARINE®-450and laminated on both sides with 0.8mm thick HPL (high pressure laminate)
Detail E Corners
Bulkheads usually
terminate at a T-junction or corner,
and are accommodated by using
internal angles
(PA-30-B) or
external angles (PA-50-B) where appropriate.
Both profiles are simply screwed
to the panels as shown, using the
fixings provided.
For angles other than 90°,
PA-5-B and PA-10-B equal angles are
used, although the angle must be
specified. An aesthetic alternative
to steel corners would be to employ Postformed elements.
