PROMARINE® panels have good screw holding qualities. However, we recommend that, where possible, normal wall fixtures, such as bookcases, shelves, lights etc. are attached to the panel steelwork. If fixing directly into the panel, decorative laminate face should be drilled approximately 2mm larger than screw to prevent laminate cracking. It is also recommended that the screw threads be coated with PVA glue, prior to final fitting. Where aesthetically acceptable, wall and ceiling fittings should be bolted through; heavier items such a basins, handrails, ceiling fans etc. can also be adequately fastened with the aid of inserts and dowels. The panel laminate face should also be 'overdrilled' with this option. All above fixtures, fittings and fasteners can be supplied directly with all deliveries of PROMARINE® panels and profiles.

Working & Handling Information

PROMARINE®-450 can be cut and/or drilled using standard joinery tools, although dust extraction equipment is recommended if using power tools in a confined environment. Boards do not require any specialised handling equipment, and should be stored indoors
on the pallet until required. A Health & Safety Data Sheet for PROMARINE®-450 is available upon request